GENERAL ENGINEER

Duties

• You will be a Lead Engineer for In-Service Submarine Weapons Systems and Launcher Systems.
• You will serve as an advisor in applying advanced concepts, principles, and processes for life cycle engineering and management of various In-Service Submarine Weapons Systems and Launcher Systems, subsystems and equipment.
• You will plan and conduct various engineering development programs/projects that involve continuous systems modification, systems requirement evaluation, and performance analysis affecting In-Service Submarine Weapons Systems and Launcher Systems.
• You will determine and evaluate the efficiency of adopted improvements to ensure satisfactory progress and fulfillment of requirements.
• You will provide engineering oversight of Condition Based Maintenance (CBM) and Reliability Centered Maintenance (RCM) engineering practices.
• You will resolve technical problems through expert knowledge of submarine In-Service Submarine Weapons Systems and Launcher Systems design, operations, logistics support practices, and sound technical judgment.
• You will ensure appropriate systems engineering processes are properly applied during In-Service Submarine Weapons Systems and Launcher Systems life cycle sustainment.

Requirements

Conditions of employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

Your resume must demonstrate at least one year of specialized experience equivalent to the next lower pay band, NH-02 (or GS-11 equivalency), in the federal service or equivalent experience in the private or public sector as a Professional Engineer leading or coordinating engineering programs to analyze, monitor, maintain systems engineering requirements and determine solutions for a ship, submarine or undersea research and development weapons system.

Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Additional information

The NH-03 broadband is equivalent to the GS-12/13 grade levels.

SALARY RANGES DEPENDING ON LOCATION:
WASHINGTON NAVY YARD, DC: $102,415 - $158,322
KINGS BAY, GA: $89,508 - $138,370
NEW LONGDON, CT: $100,992 - $156,124
BANGOR, WA: $100,602 - $155,521

This position is covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/

Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.